Sutron Corporation Satlink Operations & Maintenance Manual, Rev 8.04.2 11/3/2016 pg. 18
4. Installing Satlink
4.1. Attaching SL3-1
Requirements of the intended installation site are:
Sufficient protection from moisture for an IP 63 device.
Proper space for the electrical cables
Temperature range -40C to +70C.
Space for installation using the mounting ears
Earth ground point for the connection of the SL3 earth ground.
Closed control cabinet or fire protection cabinet if the power supply is not a low power
source 12-20VDC.
The dimensions for SL3-1 are shown in figure below along with the locations of the mounting
ears.
To Next Page
Loading...