Sutron Satlink 3 - Scope of Supply; SL3-1 Model Overview; SL3-SDI-1 Model Overview; SL3-XMTR-1 Model Overview

Sutron Corporation Satlink Operations & Maintenance Manual, Rev 8.04.2 11/3/2016 pg. 8
1. Scope of Supply
SL3-1
GOES/METEOSAT/INSAT/GMS Satellite transmitter including 11 physical input
channels (1xRS485, 2xSDI-12, 2xpulse/status, 2x5V analog, 3xDifferential
Analog, 1x 4-20mA), 4 isolated switched supplies, 1 isolated non-switched
supply, 2 switched open collector outputs, RS232, USB host, USB device, Wi-Fi,
power supply/ground connector, 9 2/3/4 pin connectors for sensors, 32 MB (1
million readings) measurement memory, 2 status LED, multifunction button
with LED, GPS receiver, 2 slots for expansion cards: optional Iridium modem,
optional LTE modem
1 quick start guide
1 factory acceptance test (FAT) certificate
1 USB cable
1 screwdriver
SL3-SDI-1
GOES/METEOSAT/INSAT/GMS Satellite transmitter including 2 physical input
channels (2xSDI-12) RS232, USB host, USB device, Wi-Fi, power supply/ground
connector, 32 MB (1 million readings) measurement memory, 2 status LED,
multifunction button, GPS receiver
1 quick start guide
1 factory acceptance test (FAT) certificate
1 USB cable
1 screwdriver
SL3-XMTR-1
GOES/METEOSAT/INSAT/GMS Satellite transmitter including RS232, USB host,
USB device, power supply/ground connector, 2 status LED, multifunction
button, GPS receiver
1 factory acceptance test (FAT) certificate