Sutron Corporation Satlink Operations & Maintenance Manual, Rev 8.04.2 11/3/2016 pg. 36
2) Load the script in to a thumb drive. The file must be copied in to the station folder, and must
be renamed with the station as part of the file name. For instance if the station was named S01
then the file must be renamed "S01_script.txt"
3) Attach the modem to the Rs232 port an SL3 and insert the thumb drive. Look for a
script_results.txt in the daily sub-folder and examine it for errors. Once the modem is working,
enable passwords to help secure the station.
The script is designed to be run on a factory fresh modem or one that's already running the
script. The script will switch the speed of the RS232 port to 115200 baud.
See āConnecting via TCP/IPā for instructions on how to use LinkComm with the external modem.
To Next Page
Loading...