15
CHAPTER 2 TIME MODE
Note: This feature applies to the Altimax, Navitec, Vector and X-Lander.
The watch function provides the user with:
an adjustable 24/12 hour clock display;
a calendar pre-programmed to the year 2089; and
three sub modes: three daily alarms, stopwatch and countdown timer.
To view and use the Time mode function:
Check the Mode Indicator Bar. If the mode arrow is not on TIME, PRESS the [Mode] button until the
arrow is directly below TIME on the bar.
In the TIME mode:
Field 1 displays the day of the week.
Field 2 displays the current time.
Field 3 displays the date (month/day).
The Outer Circumference graphically displays time in seconds.
The Time mode and all sub modes can be adjusted through the setup program of the Wristop Computer.
How to Setup the Time
To setup the Time:
1. PRESS the [Select] button and hold for 2 seconds. Located in Field 3, the seconds will begin to flash.
2. PRESS the [+] button to scroll the seconds upward or
PRESS the [-] button to reset the seconds to zero.
3. At the seconds desired, PRESS the [Select] button to move to the next setting. Located on right of
Field 2, the minutes will begin to flash.
4. PRESS the [+] button to scroll the minutes upward or
PRESS the [-] button to scroll the minutes downward.
5. At the minutes desired, PRESS the [Select] button to move to the next setting. Located in the center of
Field 2, the hour will begin to flash.
To Next Page
Loading...
