20
How to Setup the Countdown Timer
1. PRESS the [Select] button and hold for 2 seconds. Located in Field 1, the seconds will begin to flash.
2. PRESS the [+] button to scroll the seconds upward or
3. PRESS the [-] button to scroll the seconds downward.
4. At the seconds desired, PRESS the [Select] button to move to the next setting. Located on right of
Field 3, the minutes will begin to flash.
5. PRESS the [+] button to scroll the minutes upward or
PRESS the [-] button to scroll the minutes downward.
6. At the minutes desired, PRESS the [Select] button to move to the next setting. Located in the center of
Field 3, the hour will begin to flash.
7. PRESS the [+] button to scroll the hour upward or
PRESS the [-] button to scroll the hour downward.
8. At the hour desired, PRESS the [Mode] button to accept the changes and exit the setup program.
9. The countdown timer setup is complete.
How to Start the Countdown Timer
To start the countdown timer:
1. PRESS the [+] button to start, stop, and restart the timer.
2. PRESS the [-] button to reset the timer to zero once the timer has stopped.
Note: When the countdown timer is activated, the countdown timer will continue and remain in the
background if the user is in other modes or sub modes. The user can identify the countdown timer still
activated by the flashing text timer in Field 3.
DUAL TIME MODE
Note: This feature applies to the Altimax and Navitec Wristop Computer
In the TIME mode, PRESS the [Select] button:
for the Altimax four times
for the Navitec three times
to enter this sub mode.
To Next Page
Loading...
