Suunto Vector - Clearing the Logbook History

34
PRESS [+] to scroll through the different displays.
In the second display:
 Field 1 displays the text HI;
 Field 2 displays the highest altitude recorded since the last date cleared; and
 Field 3 displays the date when it was reached with the text Log Book to the left.
In the third display:
 Field 1 displays the text ASC;
 Field 2 and 3 show up to an 8 digit accumulative vertical ascent since the last reset. Field 2 is activated
when the value of the vertical ascent is beyond the 3 digit value displayed in Field 3.
In the fourth display:
 Field 1 displays the text dSC;
 Field 2 and 3 show up to an 8 digit accumulative vertical ascent since the last reset. Field 2 is activated
when the value of the vertical ascent is beyond the 3 digit value displayed in Field 3.
Clearing the Logbook History
To clear the history of the logbook:
1. In any of the logbook history displays, PRESS the [Select] button and hold for 2 seconds. Located in
Field 1 is the text CLR; in Field 2 the text HIS; and in Field 3, nO will begin to flash.
2. PRESS the [+] button to toggle between YES and NO.
3. PRESS the [Mode] button to accept the option YES.
The logbook history is erased and a new starting date is set to begin new cumulative measurements.
Note: If the user does not press any button for 1 minute in the setup mode, the display will automatically
exit setup.
We recommend that the logbook history be cleared prior to beginning logbook recording(s).