Suunto Vector - LOGBOOK MODE

31
2. PRESS the [+] button to scroll back up.
Note: Replacing the battery will not erase this information.
LOGBOOK MODE
In the Altimeter mode, PRESS the [Select] button three times to enter this sub mode. The logbook mode
features five displays. The displays automatically rotate showing the first display for 7 seconds then
proceeds showing displays 2 through 5 at 4 second intervals.
In the first display:
 Field 1 displays the year;
 Field 2 displays the text LO with the current logbook number flashing; and
 Field 3 displays the month and day of the particular logbook number. To the left of the month/day, is
the text Log Book.
The user can PRESS the [-] to scroll down to view previous logs captured and then PRESS [+] to scroll up
to the current logbook.
The second display shows the ascent information for the particular logbook that is being viewed.
 Field 1 displays the average ascent rate during the event;
 Field 2 displays the total vertical ascent ; and
 Field 3 displays the text ASC along with the text Log Book to the left.
The third display shows the descent information for the particular logbook that is being viewed.
 Field 1 displays the average descent rate during the event;
 Field 2 displays the total vertical descent; and
 Field 3 displays the text dSC along with the text Log Book to the left.
The fourth display shows the number of laps (runs; either ascents or descents) completed for the particular
logbook that is being viewed.
 Field 2 displays the total number of ascents or descents ; and
 Field 3 displays the text LAP along with the text Log Book to the left.
Note: A Lap is a vertical movement either ascent or descent equaling 150 ft (50 meters) or above.