33
For the Altimax model:
Logbook recording starts by pressing the [+] button twice within 2 seconds. Logbook recording stops by
pressing the [+] button twice as well within 2 seconds.
Note: For the Altimax, Vector and X-Lander models logbooks are self-erasing and cannot be cleared by
the user.
Fast Cumulative Button
This feature is furnished in the Altimax model. This allows the user to check the cumulative vertical
ascent/descent in feet or meters, as well as number of runs of the current logbook while recording.
Accessing this information is performed by pressing the [-] button in any of the main modes. When
activated, three displays will automatically rotate in intervals of four seconds.
The first display shows the accumulative vertical ascent since the beginning of the current logbook.
The second display shows the accumulative vertical descent since the beginning of the current logbook.
And finally, the third display shows the number of runs accomplished during the current logbook.
After the third display is shown, the Altimax automatically returns to the main mode in which the user
was viewing.
Note: During this process, pressing the [-] button allows the user to toggle among one of the three
displays.
LOGBOOK HISTORY MODE
The Logbook history shows a summation of all logs recorded.
In the Altimeter mode, PRESS the [Select] button four times to enter this sub mode. The logbook history
mode features four displays.
In the first display:
Field 1 displays the year when the logbook history has been last cleared;
Field 2 displays the text HIS; and
Field 3 displays the month and day when the logbook history has been last cleared. To the left of the
month/day, displayed is the text Log Book.
To Next Page
Loading...
