42
minute of whether the calibration was successful displaying the text dOnE in Field 2 or if the
process needs to be repeated displaying PUSH and - in Field 2.
Note: The user may need to perform the rotating of the compass more than twice around for the
calibration to be completed.
Note: If the text FAIL appears in Field 2, the battery should be removed and put back in before
trying to proceed with the calibration process. The removal of the battery will reset the unit.
5. Once the calibration is successful, PRESS the [Mode] button to accept the process and exit the
calibration mode.
Note: It is important to hold the Wristop Computer level during the calibration process to ensure accuracy.
The compass calibration is complete.
To Next Page
Loading...
