Suzuki DL1000 - Page 61

ENGINE 3-15
• Tighten the engine mounting nut
A, B to the specified
torque.
$ Engine mounting nut
A: 75 N·m (7.5 kgf-m, 54.0 lb-ft)
Engine mounting nut
B: 55 N·m (5.5 kgf-m, 40.0 lb-ft)
• After tightening the bolt
C, tighten the pinch bolt D to the
specified torque.
$ Engine mounting bolt
C: 55 N·m (5.5 kgf-m, 40.0 lb-ft)
Engine mounting pinch bolt
D:
23 N·m (2.3 kgf-m, 16.5 lb-ft)
• Install the washers and tighten the union bolt to the specified
torque.
$ Oil hose union bolt: 23 N·m (2.3 kgf-m, 16.5 lb-ft)
• Install the new gaskets.
• Install the exhaust pipes and mufflers.
NOTE:
Apply THREAD LOCK “1342” to the bolt
E.
% 99000-32050: THREAD LOCK “1342”