ENGINE 3-29
OIL SUMP FILTER
• Remove the oil sump filter.
OIL PUMP
• Remove the oil pump driven gear
1 by removing the snap
ring.
" 09900-06107: Snap ring pliers
• Remove the pin
2 and washer
3.
NOTE:
Do not drop the snap ring, pin and washer into the crankcase.
• Hold the generator rotor with the special tool.
" 09930-44541: Rotor holder
CAM DRIVE IDLE GEAR/SPROCKET
• While holding the generator rotor, remove the cam drive idle
gear/sprocket nut.
To Next Page
Loading...
