Power Trim and Tilt: 2B-18
7) Remove the three bolts (7) and pump assembly (8).
8) Remove the check valve (9), down-blow valve (10)
and O-rings (11).
9) Using special tool, unscrew the upper eye (12).
Special tool
(B): 09945–69010 (PTT rod holder)
When removing the reservoir, exercise care
to avoid damaging the rip of oil seal.
10) Remove the four bolts securing the reservoir (13),
then detach the reservoir from the PTT body.
11) Remove the O-ring (14).
7
8
9
10
11
12
(B)
13
13
14
To Next Page
Loading...
