Suzuki GF60A - Anodes Inspection

Maintenance and Tune-Up: 0B-17
Anodes Inspection
ZAJ6110206014
Inspect anodes
Every 50 hours (3 months)
If 2/3 of zinc anode has corroded away, replace anode.
The anode should be periodically cleaned with a wire
brush to ensure maximum effectiveness.
CAUTION
Never paint the anode.
NOTE
The anode cover (1) may be separated from
the power unit body by inserting and turning
a 10 mm bolt (2) to function as a screw jack.
NOTE
The anode (3) securing bolt should be
covered with suzuki silicone seal.
: Sealant 99000–31120 (SUZUKI Silicone Seal
(50 g))
1
2
IAJ611020036-02
3
I9J011020023-01
1
1
IAJ611020037-03
3
IAJ611020038-01
3
IAJ611020039-01