Swann DVR4-2000 - Connecting Cameras

Connect the power and BNC 1.
ends of the security camera to
an extension cable.
Connect the DC end on the 2.
extension cables to the 4 way
power splitter plugs.
Connect the camera power 3.
supply to the other end of the
power splitter.
Connect the BNC end of the 4.
extension cables to the camera
connections on the back of
the DVR unit (CH1, CH2, CH3 &
CH4).
Connect the DVR power supply 5.
plug into the power supply
socket on the back of the DVR.
Plug in the camera power 6.
adapter and the DVR power
adapter to mains power outlets.
Connecting Cameras
11