5
Read Before Installation
IMPORTANT GUIDELINES
Do not expose the DVR to moisture• . Water is the arch-enemy of electrical
components and also poses a high risk of electric shock.
Avoid dusty locations• . Dust has a tendency to build up inside the DVR case,
leading to a high risk of failure or even fire.
Only install the DVR in a well ventilated space• . The circuitry and hard
drive in the DVR, like all electronic devices, produce heat, and this heat needs
a way out.
Do not open the DVR case• except to install/swap the hard drive inside. There
are no user serviceable parts inside.
Never open the case whilst the DVR is plugged in• , and never turn the
DVR on whilst the case is open.
Use only the supplied power adaptor.• Other adaptors may cause damage
to the DVR or cause a fire.
Do not cut or modify any cable for any reason.• Doing so will void your
warranty, as well as pose a great risk of fire or electrical shock.
Don’t expose the DVR to sudden bumps or shocks• (for example, being
dropped). The DVR is as robust as possible, but many of the internal components
are quite fragile.
Remember that the DVR is, in all likelihood, going to be left on 24 hours a day, •
7 days a week. Keep this in mind when choosing a location for installation.
To Next Page
Loading...
