NetViewer - About the Software
The included software “NetViewer” is an invaluable tool for accessing, operating,
controlling and backing up footage from your DVR. It interfaces with your DVR via
your local network or remotely via the Internet, so it’s also the primary method of
remotely accessing your DVR as well. The software can be installed on as many
computers as you like.
Using the NetViewer software, you’ll be able to remotely:
View live images coming from the DVR.•
Playback and backup events from the DVR hard drive directly to the remote •
terminal you are accessing the DVR from.
Change the settings and preferences in the DVR menu system (such as the •
recording schedule and quality settings).
System Requirements
Minimum Recommended
Processor 1.0 GHz or more 2.0 GHz or Dual/Quad Core
RAM 256MB 512MB or higher
Graphics Card 64MB 128MB or higher
Screen Resolution 1024 x 768 1280 x 1024 or higher
Internet Connection 128kbps upload speed 256kbps upload speed or higher
Operating System(s) Microsoft Windows
®
XP 32-bit
Microsoft Windows
®
Vista 32-bit or 64-bit
Microsoft Windows
®
7 32-bit or 64-bit
Notes:
We suggest ensuring that your network is functioning properly before installing •
this software - you can test remotely accessing your DVR via an Internet
browser window.
At the time of writing, the software does not support the newer 64-bit versions •
of these operating systems.
The NetViewer software is not compatible with Mac OS or Unix/Linux •
systems.
Microsoft Windows is a registered trademark of Microsoft Corporation in the United States and other countries.
56
To Next Page
Loading...
