Setting the Schedule
The first step in setting the schedule is choosing which channel you’d like to set
the schedule for. From the CHANNEL drop-down menu, select the channel you’d
like to set the schedule for.
If you’d like to set the schedule for more than one channel at a time, you have two
options. One option is to manually enter the same information for each channel
individually.
The other option is to choose ALL from the CHANNEL drop down menu. Selecting
this will apply the settings in the schedule to all channels on the DVR. If you want
to set a base schedule for all channels, and then configure them individually, select
ALL, set your basic schedule, and then fine tune channels one at a time. Changing
the ALL schedule will overwrite any schedule already set for individual channels.
Copying and Pasting Schedules from day to day
Rather then enter the same schedule information multiple times for each day you
wish, you can use the COPY function.
To copy the schedule settings from day to day, select the day you’d like to copy
from on the first drop down menu. Then, select the day you’d like to copy the
schedule to from the second. If you’d like all days to operate on the same sched-
ule, choose ALL from the second drop-down menu.
Using the arrow buttons or the mouse, highlight the COPY button, and left click
or press select. The schedule for the selected day will be copied to the day(s) you
have selected.
Remember: After making changes to the settings press/click the APPLY button.
21
To Next Page
Loading...
