Symantec ALTIRIS DEPLOYMENT SOLUTION 6.9 SP4 - V1.0 - Page 396

Deployment Solution 396
Command-Line Switches
SpeedLimit Specifies the minimum speed limit in Kbps to transfer
files. If the rate is slower than the rate specified here,
do not transfer files. SetSpeedLimit must be enabled
for this setting to work.
Example: SpeedLimit=10000.
Blockout
ScheduledBlockStart Specifies the beginning of the period when the client
cannot connect to the server.
Example: ScheduledBlockStart=08:00.
ScheduledBlockEnd Specifies the end of period when the client cannot
connect to the server.
Example: ScheduledBlockEnd=17:00.
BlockedDaysSun Specifies whether to block the client from connecting
to the Deployment Server between the times specified
in ScheduledBlockStart and ScheduledBlockEnd on
Sundays.
Example: BlockedDaysSun=True.
BlockedDaysMon Specifies whether to block the client from connecting
to the Deployment Server between the times specified
in ScheduledBlockStart and ScheduledBlockEnd on
Mondays.
Example: BlockedDaysMon=True.
BlockedDaysTue Specifies whether to block the client from connecting
to the Deployment Server between the times specified
in ScheduledBlockStart and ScheduledBlockEnd on
Tue sdays.
Example: BlockedDaysTue=True.
BlockedDaysWed Specifies whether to block the client from connecting
to the Deployment Server between the times specified
in ScheduledBlockStart and ScheduledBlockEnd on
Wednesdays.
Example: BlockedDaysWed=True.
BlockedDaysThu Specifies whether to block the client from connecting
to the Deployment Server between the times specified
in ScheduledBlockStart and ScheduledBlockEnd on
Thursdays.
Example: BlockedDaysThu=True.
BlockedDaysFri Specifies whether to block the client from connecting
to the Deployment Server between the times specified
in ScheduledBlockStart and ScheduledBlockEnd on
Fridays.
Example: BlockedDaysFri=True.
Parameters Details