SNMP MIB Support
The reference design has support for SNMP v2. The SNMP agents WILL be accessible through
SNMP manager applications such as HP Open View, MIB browsers. The SNMP agent WILL
support read-write, read only or disabled modes. The following are the supported SNMP MIBs.
Additional MIBs will be supported as needed for minimum functioning of the CB3000 for Symbol
Enterprise Mobility Management (SEMM) support.
Table B.1 SNMP MIB Support
MIB Name Description Supported
BRIDGE Module for managing devices supporting
802.1D
.1.3.6.1.2.17
IEEE802dot11 Standard MIB for 802.11 devices and includes
entities for station management, MAC and PHY
settings.
.1.2.840.10036
To Next Page
Loading...
