4-1
Chapter 4
Maintenance And Specifications
Introduction
This chapter explains how to maintain your scanner and the specifications for it.
Maintenance
• Do not allow any abrasive material to touch the scanner window.
• Remove any dirt particles with a damp cloth.
• Wipe the scanner window using a damp cloth, and if necessary, a non-ammonia
based detergent.
• Do not spray water or other cleaning liquids directly into the scanner window.
• If the contacts between the scanner and cradle become dirty, clean them with either
a pencil eraser or a cotton swab dampened with alcohol.
• If a significant decrease in battery life is noticed and does not correspond to
increased usage, consider replacing the battery.
To Next Page
Loading...
