Symmetricom XLi IEEE 1588 User Manual

XLi IEEE 1588 Clock 129
997-01510-03, Rev. C, 12/12/2006
2
5
1
SSSSSSSSSSSS SSSSSSSSSS SSSSSSS S SSS S SSSSS S
where:
For example, enter:
F131 B4 DHCP ENABLE (or DISABLE)
Response (one of the following lines):
OK - DHCP enable setting has been received and applied by the PTP Option Card<CR><LF>
ERROR - DHCP dynamic setting request has Failed.
ERROR - DHCP dynamic settings has Failed, using Static IP.
Get PTP Protocol settings
To get PTP protocol settings, use the following format:
F131 B<N> PROTOCOL<CR>
For example, enter:
F131 B4 PROTOCOL
Response:
F131 B4 PROTOCOL 27 ENABLE ENABLE<CR><LF>
To set the PTP protocol settings, use the following format:
F131 B<N><SP>PROTOCOL<SP><SI><SP><BS><SP><PS>
F = ASCII character F
131 = unit function number
<SP> = space
B = ASCII letter to denote Option Bay number follows
<N> = Option Bay Number, 1 through 4.
DHCP = specify Dynamic Host Configuration Protocol command
<SET> = ENABLE or DISABLE

Symmetricom XLi IEEE 1588 Specifications

General

Brand	Symmetricom
Model	XLi IEEE 1588
Category	Clock
Language	English