Symmetricom XLi IEEE 1588 User Manual

XLi IEEE 1588 Clock 139
997-01510-03, Rev. C, 12/12/2006
2
5
1
SSSSSSSSSSSS SSSSSSSSSS SSSSSSS S SSS S SSSSS S
Informational Messages
Messages in this section inform you of an event and don’t require any action on your part.
Deleted previously set IP host address
Your last action deleted the previously set IP host address.
NOTICE: Cannot respond to command because Utility Port session has
priority.
A Utility Port session has started and takes precedence. Wait until it is over before logging in or
expecting a response to an entered Telnet command.
Host <NAME> ip <ADDRESS> configured successfully!
Host configuration was successful.
Source file <NAME> bytes read: <NUMBER>
Source file was successfully read.
Dest file <NAME> bytes written: <NUMBER>
Configuration files transferred successfully!
Information was successfully transferred to the destination file.
Restarting the Unit
Please wait…
A command has just been executed that requires a soft restart of the XLi. The restart happens
immediately after this message is sent.
OK
Command accepted and processed as specified.
Goodbye.
The XLi has just terminated a session.

Symmetricom XLi IEEE 1588 Specifications

General

Brand	Symmetricom
Model	XLi IEEE 1588
Category	Clock
Language	English