TP9100 Service Manual Disassembly and Reassembly 101
© Tait Electronics Limited May 2005
5 Disassembly and Reassembly
Overview This section describes how to:
■ remove and fit the battery
■ disassemble and reassemble the battery catch
■ disassemble and reassemble the radio
General Important Before disassembling the radio, disconnect the radio from
any test equipment or power supply.
Disassemble only as much as necessary to replace the defective parts.
Inspect all disassembled parts for damage and replace them, if necessary.
Observe the torque settings indicated in the relevant figures.
For information on spare parts, refer to “Spare Parts” on page 289.
To Next Page
Loading...
