102 Disassembly and Reassembly TP9100 Service Manual
© Tait Electronics Limited May 2005
5.1 Removing and Fitting the Battery
Removing the
Battery
1. Simultaneously squeeze both battery catches inwards to release the
catch mechanism.
2. Tilt the top of the battery outwards and lift the lugs at the bottom of
the battery out of the holes at the bottom of the radio.
Fitting the Battery 1. Insert the lugs at the bottom of the battery into the holes at the bot-
tom of the radio.
2. Push the top of the battery towards the radio until the catch
mechanism snaps in.
Figure 5.1 Removing the battery from the radio
To Next Page
Loading...
