EasyManua.ls Logo

Tait TP9100 - Keypads; Frequency Bands; Accessories

Tait TP9100
326 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14 Introduction TP9100 Service Manual
© Tait Electronics Limited May 2005
1.1 Keypads
The radios are available with the following keypads:
TP9160 with 16-button keypad (two scroll and two selection keys and
10 alphanumeric keys)
TP9155 with 4-button keypad (two scroll and two selection keys)
The keypads are implemented by different front panels and keypads.
The rest of the radio hardware is identical.
1.2 Frequency Bands
The radios are available in the following frequency bands:
136 to 174MHz (B1)
400 to 470MHz (H5)
450 to 530MHz (H6)
The frequency bands are implemented by different main boards.
1.3 Accessories
Tait offers a large variety of audio accessories, antennas, a single battery
charger, batteries, and other accessories such as carry cases.
For more information on the serviceable accessories refer to Chapter 3
Accessories on page 295 of this service manual.
Audio Accessories The radios allow for the connection of a comprehensive range of audio
accessories:
“Evolution” speaker microphone
light duty headset with boom microphone (behind the head)
heavy duty headset with noise-canceling boom microphone (over the
head)
three wire headset with mini-lapel microphone
accessory connector kit
third-party audio accessories as approved on a per-CSO basis
Antennas The radios allow for the connection of helical and whip antennas. For an
overview of the antennas available, refer to “Antenna Identification Chart”
on page 297.

Table of Contents

Other manuals for Tait TP9100

Related product manuals