TP9100 Service Manual Introduction 15
© Tait Electronics Limited May 2005
Single Battery
Charger and
Batteries
The single battery charger is used to charge the following Tait batteries:
■ 6-cell NiMH
■ 6-cell NiCd
1.4 Product Codes
This section describes the product codes used to identify products of the
TP9100 portable radio product line.
Radios The product codes of the TP9100 portable radios have the format:
TPA1a–bbcc
where:
■ a identifies the keypad option:
1=4-button keypad, 2=16-button keypad
■ bb identifies the frequency band:
B1=136 to 174MHz, H5=400 to 470MHz, H6=450 to 530MHz
■ cc identifies any radio options.
Accessories The product code of the accessories specific to the TP9100 portable radios
have the format:
TPA–xx-xxx
1.5 Labels
The following external labels are attached to the back of the radio (covered
by the battery):
■ compliance information and RF exposure safety warning
■ serial number and product code
Figure 1.2 Labels of the TP9100 series
TPAB12-B100
136-174 MHz
S/N
19061964
102104337
Contains intellectual property licenced by
Digital Voice Systems Inc, Motorola Inc
and Tait Electronics Ltd.
Details in user documentation.
N46
TPAB1A
FCC ID: CASTPAB1A
Made in New Zealand by Tait Electronics Ltd.
IC: 737A-TPAB1A
ATTENTION!
Restricted to
occupational use to satisfy
FCC RF exposure limits. See user's
guide for operating instructions.
To Next Page
Loading...
