MAINTENANCE
When
Required
Lubricating the Levers
AwARNING
Set the machine
in
the parking position,
stop the engine, remove the ignition key
and store it. Failure to
do
so may result
in
the machine moving abruptly, leading to
serious injury or death.
If the levers or pedal no longer move
smoothly, apply grease.
Control levers
E4G058
1. Remove the lower mount section of the
boot
(1)
and turn
it
upwards.
2.
Wipe off the old grease.
3.
Apply grease to points
(A)
and
(B)
.
4.
Re-install the boot
(1).
152
Inspecting and Replenishing the
Windshield Washer Fluid
Use
a windshield washer fluid intended
specifically for motor vehicles. Follow the
instructions included with the washer fluid.
T8G004
Inspection
1 . Open the cab door.
2.
Inspect the washer tank
(1)
and
add
washer fluid if the
level
is
low.
Replenishing
1.
Mix the washer fluid to the prescribed
concentration.
2. Remove the cap
(2)
and
add washer
fluid.
3.
Reinstall the cap
(2)
.
To Next Page
Loading...
Need help?
General
