GTS Technical Manual
15. March 2010 Edition: V1.00/2010 5-16
Copyright © 2010, Diversey Inc.
05.0 swingo 855 B Power - mechanics.fm
Picture 9: Water tank axle
• Remove water tank fixation screws.
• Remove water tank from axle.
• Remove the existing parts from the tank and place it on the
new one.
Mount
• Position the new water tank on the axle.
• Fix the water tank onto the axle with the two screws.
• Open the battery compartment.
• Thread in cables from the battery compartment.
• Assemble charger jack on the rear panel.
• Connect fresh water hose to the water tank.
• Assemble tank cover according to chapter REPLACING OF
TANK COVER.
• Adjust battery compartment lock.
• Lock the battery compartment on both sides with the screws
from the locking system.
Adjustment
Ensure that the screws of the lock can be properly positioned.
To Next Page
Loading...
Need help?
General