GTS Technical Manual
15. March 2010 Edition: V1.00/2010 6-10
Copyright © 2010, Diversey Inc.
06.0 swingo 855 B Power - electronics.fm
6.2.3 Power electronics
Picture 6: Power electronics
6.2.3.1 Replacing of power electronics
Remove
• Loosen the two screws that fix the power electronics to the
support.
• Move out the power electronics.
• Disconnect wires and connectors.
• Remove power electronics.
Mount
• Take new power electronics.
• Connect wires and connectors to power electronics.
• Position power electronics on the support.
• Tighten the two screws.
Tighten the connectors with the correct torque.
Adjustment
• M5 (05/121) with 5 Nm
• Battery minus
• Brush minus
• M6 (05/124) with 7 Nm
• Brush plus
To Next Page
Loading...
Need help?
General