tBPC oCare Pro100 - Page 71

Taiwan Biophotonic Corporation
71
BLUETOOTH
®
and Continuous
Monitoring
function is
disabled in
“CONTORL”
Device is charging
Conduct the
measurement or data
upload process after
charging.
Device
automatically
shuts down
Battery is depleted
Charge the device as
illustrated in Figure
3.
Device battery
runs out quickly
Idle-Time-to-Sleep
is set to “Never”
Change the
Idle-Time-to-Sleep
setting in
“SETTING”, to 3
minute to conserve
the battery
consumption.
If these solutions do not correct the problem, please contact
local distributor or Taiwan Biophotonic Corporation at +(886)
3-667-0888.