Why is the load regulation poor on my TDK-Lambda Genesys?
If you are experiencing poor load regulation with your TDK-Lambda Power Supply and the front panel CV LED is on, the sensing wires may not be connected properly. Connect the sense wires according to the instructions in the User’s Manual.
Covers essential safety precautions, installation guidelines, grounding, fuses, and warnings for safe operation and handling.
Details output ratings, input characteristics, and static/dynamic performance parameters.
Guides through inspection, preparation, rack mounting, and AC source requirements.
Details step-by-step procedures for checking voltage, current, OVP, UVL, and Foldback.
Explains wiring, cable selection, termination, noise effects, and sensing methods for load connection.
Explains Constant Voltage, Constant Current, and Automatic Crossover modes.
Covers OVP, UVL, Foldback protections, ON/OFF control, and startup modes.
Offers a guide to diagnose and resolve common operational issues and symptoms.
General| Operating Temperature | 0 to 50 °C |
|---|---|
| Remote Interface | RS-232, RS-485, USB, Ethernet, GPIB |
| Programming | Analog control |
| Cooling | Forced air |
| Protections | Over voltage, over current, over temperature |
| Input Frequency | 45 to 65 Hz |
| Dimensions | Varies by model |
| Weight | Varies by model |
| Output Power | Up to 15 kW |
| Output Voltage Range | 0-6V to 0-600V (model dependent) |
To Next Page
