25
8. Key lock
OFF, operator can select other process by press on the 10X quick process button.
ON, processor won’t response when operator press on the 10X quick process button.
9. Change password.
Higher level authority can change lower level authority log on password.
10. Centering Device switch (Normally OFF)
When switch ON, Centering Device is activated.
11. Auto Trigger
Turn on this button while Centering Device activated, cycle can be run automatically without press on both start
button. DON’T use this function for production, since a cycle start without hands on start button, operator could
have chance to put hands into processor, that may cause crushing.
To Next Page
Loading...