53
4.5 Repair
THE TASKS IN THIS SECTION SHOULD ONLY BE CARRIED OUT BY A SUITABLY
QUALIFIED TECHNICIAN. THE PROCESSOR MUST BE ALLOWED TO COOL AND
BE DISCONNECTED FROM THE MAINS SUPPLY BEFORE CARRYING OUT ANY
REPAIR OR REPLACEMENT.
THE PROCESSOR HAS A CAPACITOR AS PART OF THE AUTO-RETRACT
FEATURE. NORMAL PRECAUTIONS REGARDING DISSIPATION OF STORED
ENERGY MUST BE TAKEN PRIOR TO ANY SERVICE OR REPAIR.
AFTER COMPLETION OF A REPAIR OR REPLACEMENT, THE APPROPRIATE
SAFETY CHECKS MUST BE MADE. REFER TO section 2.2 “Electrical Safety”.
4.5.1 Circuit Protection Devices
The Processor is protected by four external fuses fitted at the back of the unit. See section 1.4 for detail.
To Next Page
Loading...