The charging console incorporates an absolute white standard, which should not be
touched but should always be kept clean.
The above image shows how to connect the plug of the AC adapter with the charging
console. The AC adapter can be used universally for 100 – 240 V and 47 – 63 Hz.
There are three adapter plugs for dierent countries. To change an adapter plug, just
unlock the lock, pull the plug o the AC adapter and push in the new one. Make sure
it is connected rmly.
Connect the mains plug to the power socket. The socket must be located near the
facility and must be easily accessible. Do not use the power plug if the power cord is
damaged.
Always use the original TECHKON SpectroDens AC adapter. The use of other power
sources is hazardous.
AC adapter with three dierent mains plugs Device in the state of charging
UK
USA
Europe
1. Absolute white standard
2. Charging contacts for wireless, inductive
battery charging
3. Low voltage connector for the plug of the
AC adapter
1.
2.
3.
To Next Page
Loading...
Need help?
General