3.9 Software module: Media Wedge
The program module Media Wedge serves the fast, colorimetric analysis of the Ugra /
Fogra Media Wedge. This digital control element is available from Fogra, the Ger-
man “Graphic Technology Research Association” (www.fogra.org). The test element
is placed at the border of a proof. The software evaluates the color quality printed in
colorimetric terms.
Color dierences between the Fogra target values and the measured samples will be
clearly represented in this program module.
The software module Media Wedge is only available in the SpectroDens Premium
version.
1. Manual selection of the media wedge ver-
sion. (You will nd the version number on the
printed test element.) The software supports
the Ugra / Fogra Media Wedge in version 3.0
as well.
2. With SpectroDens Premium there is a me-
dia wedge feature within the device as well.
Measurements can be made remotely with-
out a connection to the PC. When the device
gets connected later, the measured data will
be uploaded.
3. Selection of reference values
4. Overview of measurement results
5. A short protocol can be printed with a
Dymo label printer on a self-adhesive label
which can be stuck on the proof. Alternatively
a detailed report of the measurement values
can be printed (see p. 90).
5.
1.
3.
4.
2.
To Next Page
Loading...
Need help?
General