3.13 Software module: SpectroCheck
TECHKON SpectroCheck (optionally available) is a color reference used to check the
measuring accuracy of the SpectroDens advice.
Connect SpectroDens and SpectroCheck via the USB cable with the computer. The
program module SpectroCheck will now lead you step by step through the checking
procedure of the measurement device. The information, whether the device corre-
sponds to the technical specications, can also be printed out.
Note: The checking of the TECHKON SpectroDens has to be made with 3.0 mm stan-
dard aperture.
To Next Page
Loading...
Need help?
General