Average values
From a series of single measurements Average values can be calculated and dis-
played. This function may be used when the surface of the sample has no even distri-
bution of color.
By selecting the “soft key” with the average
symbol a pop-up window will appear where
Average measurement can be set, started
and cancelled.
Here the Number of measurements to be
calculated to one average value is set. The
maximum number of single measurements
is 9.
Now activate Start Average measurement.
The central window indicates how many sin-
gle measurements have been taken.
After the last single measurement has been
taken, the resulting average value will be
displayed and the procedure can start again
from the beginning.
Activating the menu item Stop Average mea-
surement you quit this measurement mode.
To Next Page
Loading...
Need help?
General