2. Sound will activate an acoustic signal after
each measurement.
3. With activated Automatic Paper White
Calibration SpectroDens will always perform
automatically a paper white calibration when
a measurement on a paper white is made.
We recommend to activate this function only
when the substrate to be printed is often
changed.
1. The SpectroDens INFO screen informs
about the type of device (Basic, Advanced
or Premium), the software- and hardware-
version as well as the serial number. It also
indicates whether a WLAN module is installed
and informs about device checks.
Menu: Device settings
The “soft key” with the cogwheel symbol opens the window for the device settings.
Within this window you can navigate with the arrow buttons and select with the enter
button. The red escape button brings you back to the measurement mode.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
To Next Page
Loading...
Need help?
General