Techmaster T9530 - Opening Periods - Add; Opening Periods - Verify or Delete

Page 10 of 32 IU_TechMaster_02_eng
Press to scroll all the set values.
Press to delete the set values. LCD will display the message:
DELETE?
!
Press to delete the LCD values or press to exit.
At the end of the list press .
END OF LIST
1.2.5. Opening Periods - Add
Use this function to add Opening Periods values.
Power up TechMaster and access the Time Lock menu. Press .
STANDARD WEEK 1
Press four times.
OPENING PERIODS
Press . LCD will display the message:
ADD
Press . LCD will display the message:
! DD/MM/YY hh:mm
" DD/MM/YY hh:mm
The first one is the opening time and date and the second one is the closing time and date.
Enter Opening and Closing time and date, then press to confirm.
If a value for Year is set, this Opening Period will cease after that date.
If a value for Year is not set, this Opening Period will repeat every year.
To cancel entered values, press .
Repeat this procedure for every Opening Period.
During Opening Periods it will be possible to open the safe’s door even if Time Lock is active.
Up to 30 Opening Periods are available for a maximum of nine (9) days each.
1.2.6. Opening Periods – Verify or Delete
Use this function to verify or delete Opening Periods values.