Page 16 of 32 IU_TechMaster_02_eng
Press at the end of the operation, to close the communication.
Depending on lock configuration this menu could not be available
Press and then press two times. LCD will display the
message:
OVR MANAGER MENU
X X X X X X
Enter OVR Manager code (default code 6-5-4-3-2-1).
3.1. Users Management – install/delete/disable user
Depending on lock configuration you could find this menu inside Master menu or
inside Manager menu
Use this function to install, delete, enable or disable or disable OVR Users on the lock.
Power up TechMaster and access the OVR Manager Menu.
Press . LCD will display the message:
Press to check the list of OVR Users or enter a OVR User ID to
select a user.
Press . LCD will display the message:
Press to confirm, or press to install/delete/disable/enable
and press to confirm. To skip to the following user, press
when LCD displays the message “Next?”.
To Next Page
Loading...