Techmaster T9530 - 1. Master Menu Operations; 1.1. Setting Time and Date

Page 6 of 32 IU_TechMaster_02_eng
Audit
Each Lock will record last 900 operations with time & date, user and function.
Override Reopening
TechMaster can be set to have Override Reopening option (from 0 to 59 minutes). If
this option is set, it will be possible to reopen the lock overriding Time Delay during
the set value of time. This function is available only after a standard opening
procedure of the lock (after opening with time delay).
Important notes
Simple/trivial codes, which could be easily guessed (1,2,3,4,5,6) have to be
prevented.
Never remove lock cover, this voids the warranty.
1. Master Menu
Power up TechMaster.
Press . LCD will display the message:
MASTER MENU
X X X X X X X X
Enter Master code (default code 1-2-3-4-5-6-7-8).
1.1. Set Time and Date
Use this function to change Time and Date.
Power up TechMaster and access the Master Menu. LCD will display
the message:
SET
TIME AND DATE
Press . LCD will display current time and date.
08:00 FRI
27/01/2006
Press to modify Time and Date.
hh:mm _ _ _
DD / MM / YYYY