Techmaster T9530 - 4. Code Management Menu; 4.1. Changing User and OVR User Codes; 4.2. Changing Manager Code

IU_TechMaster_02_eng Page 17 of 32
T1
User following time lock table number 1
User following variable time delay
User with Dallas key
4. Change Code Menu
Personal data (like birthday) or other data which could be easily concluded with
some knowledge about the end user have to be prevented. After changing the code,
the lock has to be checked several times with open door.
Power up TechMaster.
Press and then press three times. LCD will display the
message:
CHANGE
CODE
4.1. Change Users and OVR Users Code
Use this function to change Users and OVR Users code. Always perform this operation with
the door opened.
Power up TechMaster System and access the Change Code Menu.
Press . LCD will display the message:
CHANGE USER
CODE
Press to confirm. LCD will display the message:
OLD CODE
X X – X X X X X X
Enter the old code. LCD will display the message:
NEW CODE
X X X X X X
Enter the new code. LCD will display the message:
CONFIRM CODE
X X X X X X
Confirm the new code.
4.2. Change Manager Code
Use this function to change Manager code. Always perform this operation with the door
opened.
Power up TechMaster System and access the Change Code Menu.
Press . LCD will display the message:
CHANGE USER
CODE
Press . LCD will display the message:
CHANGE MANAGER
CODE