Techmaster T9530 - 2. Manager Menu Functions; 2.1. User Account Management; 2.2. Time Delay and Open Window Settings

IU_TechMaster_02_eng Page 13 of 32
2. Manager Menu
Power up TechMaster.
Press and then press . LCD will display the message:
MANAGER MENU
X X X X X X
Enter Manager code (default code 1-2-3-4-5-6).
2.1. Users Management – Install/Delete/Enable/Disable users
Use this function to install, delete, enable or disable or disable Users on the lock.
Power up TechMaster and access the Manager Menu.
Press . LCD will display the message:
USERS
MANAGEMENT
Press to check the list of Users or enter a User ID to select a
user.
01 02 03 04
! ! ! !
Press . LCD will display the message:
01 ! T1
DISABLE?
Press to confirm, or press to install/delete/disable/enable
and press to confirm. To skip to the following user, press
when LCD displays the message “Next?”.
LCD symbols meaning
xx ! T1
DISABLE?
xx
User ID
!
User installed
x
User disabled
User with 6 digits code
T1
User following time lock table number 1
User following variable time delay
User with Dallas key
2.2. Time Delay and Open Window
Use this function to set, modify or verify Time Delay and Open Window values.
Power up TechMaster and access the Manager Menu.
Press . LCD will display the message:
T. DELAY AND
O. WINDOW