Technica Engineering CM CAN Combo - Page 63

CM CAN Combo User Manual
63
4 Byte
1
2
3
4
CM_ID
Counter
Version
TECMP_Function
IVN_Type
Reserved
TECMP_Signals
TECMP_Channel
Timestamp Bit 63..32
Timestamp Bit 31..0
Length
TECMP_SourceStat
Source Data
...
Table 6-2: A vehicle data frame in a TECMP frame
4 Byte
1
2
3
4
CM_ID
Counter
Version
TECMP_Function
IVN_Type
Reserved
TECMP_Signals
TECMP_Channel
Timestamp Bit 63..32
Timestamp Bit 31..0
Length
TECMP_SourceStat
Source Data
...
TECMP_Channel
Timestamp Bit 63..32
Timestamp Bit 31..0
Length
TECMP_SourceStat
Source Data
...
Table 6-3: Several vehicle data frames in a TECMP frame
Note: Packing multiple vehicle frames is only done for the same IVN_ Type.
Note: Source Data is not aligned on 4 bytes. That the above representation is not the
same as a memory mapping. The presentation should only represent the basic
scheme.
Field Name
Data
Type
Description
CM_ID
UINT16
Each Capture Modul can be configured with a unique ID. This ID can
be used to identify different Modules if they are used in one network.