If a menu screen is shown
A menu screen is shown on your
television shortly after starting some
DVDs and Video CDs. To continue
play you must make a selection.
(menu example)
Press the cursor buttons (werq) to
highlight an item.
Press [ENTER] to confirm your selection.
OR
Press the numbered button
corresponding to the menu item.
For items numbered 10 and over, press [≥10/-/--] then the two
digits.
e.g. 10: [≥10/-/--] / [1] / [0]
e.g. 25: [≥10/-/--] / [2] / [5]
Video CD menu items can only be selected with the numbered
buttons.
Other buttons used to operate menus
The operation of these buttons differs with the disc so read the
instructions that came with the disc for further details.
[u SKIP i]: Shows the next menu.
[RETURN]: Shows the previous menu.
[MENU]: Shows the menu screen (DVD).
[TOP MENU]: Shows the first menu screen (DVD).
When [
g
] is pressed.
The play indicator flashes to indicate that the resume function is
active.
Using the resume function to restart play
While the play indicator is flashing, press [q].
Play starts from where it was stopped.
If you are playing DVD, you can activate the CHAPTER REVIEW
function while the message, “Press PLAY to Chapter Review” is
shown on your television. This message appears for a few seconds
before play is resumed.
Press [q] while this message is shown on your television and the
beginning portions of each chapter up to the current one are played.
Full play resumes from the point play was stopped at.
CHAPTER REVIEW is not possible with some DVD.
¡Resume is canceled if you open the disc tray or change the play
mode (RANDOM a page 24 and PROGRAM a page 25).
¡Resume does not work if the disc’s play time is not displayed.
¡The position is saved even if the unit is turned off.
Note
Resume function
To Next Page
Loading...
Need help?
Front Speaker Specifications