Some DVDs have more than one soundtrack recorded on them,
such as multiple languages or PCM, and you can change
soundtracks during play.
During play
Press [AUDIO] to
display the
soundtrack number.
The soundtrack number changes
each time you press the button.
You can also use the cursor buttons or numbered buttons while the
icon is displayed (about 5 seconds).
¡You can only select languages or sound formats if they have
been recorded on the disc you are playing.
¡The default language is restored when the resume function is
canceled.
Note
Soundtrack and subtitle language settings
You can make language settings before play with the Disc
settings menu (a pages 41–42). Whenever the unit is turned on
or the disc is replaced, the unit will specify the language you set.
If the language you select is not on the disc, the disc will be
played in its primary language.
Despite any changes to the settings, some discs will specify
another language when play is started.
You can use this feature to turn the vocals on and off on karaoke
DVD and Video CDs.
1. Press [AUDIO] to show the soundtrack display.
2. Press the cursor button (q) to select the vocal mode. (DVD
only)
Karaoke DVD (solo)
Press the cursor buttons (e or r) to turn the vocals “ON” and “OFF”.
Karaoke DVD (duet)
Press the cursor buttons (e or r) to switch between “V1”, “V1+V2”,
“V2” and “OFF“.
Video CD
Press the cursor buttons (e or r) to switch between “LR”, “L”, and
“R”.
¡You can turn the vocals on and off by pressing [AUDIO] if vocals
are recorded on the second soundtrack.
¡You cannot connect a microphone to this unit.
Note
Changing soundtracks
To Next Page
Loading...