Technics SC-HDV600 User Manual

45
RQT5941
Reference
Delay time
1 Press the cursor buttons (werq) to select
the delay time box you want to adjust and
press [ENTER].
2 Press the cursor buttons (e or r) to change
the setting.
(Refer to “Calculating delay time” below)
3 Press [ENTER].
Calculating delay time
Center speaker
If DF is less than or equal to DC, then set the delay time to 0ms.
If DF is greater than DC, then set the delay time as follows.
Difference between D
F and DC Delay time
50 cm 1.3 ms
100 cm 2.6 ms
150 cm 3.9 ms
200 cm 5.3 ms
Difference between DF and DS Delay time
200 cm 5.3 ms
400 cm 10.6 ms
600 cm 15.9 ms
Changing the delay time allows you to make up for differences in
distance between the speakers and the listening position.
SpeakersIcon
O
ms
Center
Surround (LS/RS)
Surround speakers
If DF is less than or equal to DS, then set the delay time to 0ms.
If DF is greater than DS, then set the delay time as follows.
DF
DS
DC
Front speaker
Surround speaker
Ideal center speaker position
Ideal surround speaker position
Ratings
To set a ratings level
Go to “Ratings”, select a level between 7 and 0, press [ENTER].
1 Press the numbered
buttons on the remote
control to enter a
four-digit password.
2 Press [ENTER] twice.
Do not forget your password.
Note
To change the setting
After you have set the level to a level between 7 and 0, use the
following operation to change the setting.
1 Select “Ratings” and press [ENTER].
2 Enter your four-digit password with the
numbered buttons and press [ENTER].
3 Press the cursor buttons (e or r) to select
the item you want to change and press
[ENTER].
¡Unlock Player (the rating level returns to 8)
¡Change Password
¡Change Level
¡Temporary Unlock
Follow the instructions on the screen to make changes.
If you enter the wrong number while entering your password
Press [CANCEL].
Ratings
Enter a 4-digit password,
then press ENTER.
Password
∗ ∗ ∗ ∗
Center speaker
Now, when you insert a DVD-Video that exceeds the ratings limit
you set, a message appears on the television.
Follow the on-screen instructions.

Technics SC-HDV600 Specifications

Front Speaker Specifications

impedance (high)	6 Ω
impedance (low)	6 Ω
input power (high, music)	30 W
input power (high, DIN)	15 W
input power (low, music)	60 W
input power (low, DIN)	30 W
output sound pressure level	87 dB/W (1.0 m)
cross over frequency	5 kHz
frequency range (-16 dB)	48 Hz–50 kHz
frequency range (-10 dB)	55 Hz–45 kHz
dimensions (W × H × D)	160 × 334 × 222 mm
mass	3.5 kg

Surround Speaker Specifications

impedance	8 Ω
input power (music)	70 W
input power (DIN)	35 W
output sound pressure level	84 dB/W (1.0 m)
frequency range (-16 dB)	130 Hz–20 kHz
frequency range (-10 dB)	150 Hz–18 kHz
dimensions (W × H × D)	140 × 99 × 118 mm
mass	0.9 kg

Center Speaker Specifications

impedance	8 Ω
input power (music)	160 W
input power (DIN)	80 W
output sound pressure level	86 dB/W (1.0 m)
cross over frequency	4 kHz
frequency range (-16 dB)	100 Hz–22 kHz
frequency range (-10 dB)	115 Hz–20 kHz
dimensions (W × H × D)	190 × 99 × 166 mm
mass	1.8 kg

Tuner Specifications

FM frequency range	87.50–108.00 MHz
FM antenna terminal	75 Ω (unbalanced)
AM frequency range (9 kHz step)	522–1629 kHz
AM frequency range (10 kHz step)	520–1630 kHz
dimensions (W × H × D)	210 × 76.3 × 251 mm
mass	1.1 kg

Amplifier Specifications

low frequency power output (stereo mode, RMS 1 kHz)	2 × 17 W
high frequency power output (stereo mode, RMS 10 kHz)	2 × 8 W
low frequency power output (multichannel mode, RMS 1 kHz)	2 × 10 W
low frequency power output (multichannel mode, DIN 1 kHz)	2 × 8 W
high frequency power output (multichannel mode, DIN 10 kHz)	2 × 6 W
high frequency power output (multichannel mode, RMS 10 kHz)	2 × 8 W
surround, center power output (DIN 1 kHz)	3 × 6 W
surround, center power output (RMS 1 kHz)	3 × 8 W
total harmonic distortion (half power, 1 kHz)	0.07%
load impedance (low frequency)	6 Ω
load impedance (high frequency)	6 Ω
load impedance (surround, center)	8 Ω
S/N	78 dB
headphones load impedance	16–32 Ω
power supply (United Kingdom)	AC 230–240 V, 50 Hz
power supply (others)	AC 230 V, 50 Hz
power consumption	110 W
standby power consumption	0.9 W
dimensions (W × H × D)	210 × 104.8 × 300 mm
mass	3.5 kg

DVD Video Player Specifications

signal system	PAL(PAL 60/NTSC)
output level (composite video)	1 Vp-p
output level (S-Video Y)	1 Vp-p
output level (S-Video C, PAL)	0.3 Vp-p
output level (S-Video C, NTSC)	0.286 Vp-p
pick up wavelength	658/790 nm
dimensions (W × H × D)	210 × 76.3 × 295 mm
mass	1.5 kg

Cassette Deck Specifications

frequency response (TYPE 1)	30 Hz–16 kHz
frequency response (TYPE 2)	30 Hz–16 kHz
frequency response (TYPE 4)	30 Hz–16 kHz
S/N (NR off)	56 dB
S/N (Dolby B NR)	64 dB
wow and flutter	0.1% (WRMS)
dimensions (W × H × D)	210 × 104.8 × 241 mm
mass	1.6 kg