Why is there no sound via HDMI, but picture is OK on my TechniSat TV Receiver?
If you're not getting any sound via HDMI on your TechniSat TV Receiver, but the picture is fine, the wrong HDMI sound format may be selected. Check the HDMI sound format in the settings.
How to fix picture not fully visible or distorted on TechniSat TV Receiver?
If the picture on your TechniSat TV Receiver isn't fully visible or appears distorted, the picture format might not be set correctly. Check the picture format settings. Also, the wrong picture display/zoom might be selected; check the picture display/zoom settings in the menu.
Why are various channels not shown correctly in channel list on my TechniSat TV Receiver?
If your TechniSat TV Receiver is not displaying certain channels correctly in the channel list, it might be because the wrong channel list is selected. Try selecting another channel list.
What to do if I cannot receive channels that were previously being received on my TechniSat TV Receiver?
If you are not receiving channels on your TechniSat TV Receiver that you previously received, it could be because the channel has moved elsewhere. Perform a channel search/scan. Alternatively, the channel may no longer be broadcast.
How to fix no sound or wrong audio playing on TechniSat TV Receiver?
If you're experiencing no sound or wrong audio playing on your TechniSat TV Receiver, Dolby Digital might be active, or the wrong audio language might be selected. Check the settings in the menu to adjust Dolby Digital and language selection.
Why is the time not displayed while in standby mode on my TechniSat TV Receiver?
If your TechniSat TV Receiver is not displaying the time while in standby mode, it could be because the time has not been acquired. Let e.g. ZDF run for approximately 30 seconds. Alternatively, standby mode might be switched off; switch on the standby clock.
How to make text easier to read on TechniSat TV Receiver info box?
If the text in the info box or SFIplus detailed information is hard to read at a distance on your TechniSat TV Receiver, it may be because the character size is set to "small". Adjust the character size in the settings.
General| Product color | Black |
|---|---|
| Supported video modes | 576i, 576p, 720p, 1080i, 1080p |
| Audio formats supported | AC3 |
| Video formats supported | AVC, MPEG1, MPEG2, MPEG4 |
| HDMI | Yes |
| USB version | 2.0 |
| USB port type | USB Type-A |
| USB ports quantity | 2 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity | 0 |
| Tuner type | Digital |
| Demodulation | 16-QAM, 32-QAM, 64-QAM |
| Audio decoders | Dolby Digital |
| Interactive TV | - |
| Frequency range | 47 - 862 MHz |
| Number of tuners | 4 tuner(s) |
| Channels quantity | 4999 channels |
| On Screen Display (OSD) languages | CZE, DEU, DUT, ENG, ESP, FRE, HUN, ITA, LIT, POL, POR, RUS, SWE, TUR |
| Signal source | Cable, Ethernet (RJ-45), Satellite |
| Video resolutions | 1920 x 1080 pixels |
| Digital signal format system | DVB-C |
| Display digits | 4 digits |
| Storage temperature (T-T) | -20 - 60 °C |
| Operating temperature (T-T) | 5 - 35 °C |
| Operating relative humidity (H-H) | 10 - 75 % |
| AC input voltage | 230 V |
| AC input frequency | 50 Hz |
| Power consumption (standby) | 3.4 W |
| Power consumption (typical) | 8.4 W |
| Reception | HD-TV, SD-TV, radio |
| Symbol rate | 1.5 - 7.2 Mbaud |
| Wi-Fi | No |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| Package depth | 212 mm |
| Package width | 396 mm |
| Package height | 56 mm |
| Package weight | 1170 g |
Weight and Dimensions| Depth | 135 mm |
|---|---|
| Width | 280 mm |
| Height | 38 mm |
| Weight | 500 g |
Instructions for changing batteries and setting remote control codes.
Selecting the country to determine time zone and service list sorting.
Configuring Internet connection and reviewing the data protection declaration.
Selecting active reception signals like Cable (DVB-C) and IPTV (DVB-IP).
Checking and modifying current network configuration settings for Internet and local media access.
Selecting to search for all channels or only unencrypted channels.
Checking for and performing available software updates for the receiver.
Explanation of the OSD interface, function highlighting, and button indications.
Instructions for turning the receiver on and off, and switching to standby mode.
Guide to accessing the main menu and navigating through various functions and settings.
Methods for selecting channels using up/down keys or the numeric keypad.
Using the navigator to view and select channels from the channel list.
Accessing and viewing the Electronic Program Guide (SFI) for channel information.
How to access the Electronic Program Guide using the SFI button.
Understanding the layout and information presented in the SFI overview.
Overview of timer functions for recording programs.
Accessing the Internet for browsing, interactive services, and the ISIO Live portal.
Using the Internet list to access pre-programmed websites.
Manually entering website addresses (URLs) to access desired websites.
Recording programs directly to a USB storage device.
Recording the current program instantly using the Record button.
Recording and playing back simultaneously for timeshifted viewing.
Programming timers for future recordings, manually or via SFI.
Accessing and playing back recorded content via the DVR Navigator.
Resolving problems with the remote control not working or batteries spent.
Resolving problems with no picture, no sound, distorted picture, or incorrect audio.
Troubleshooting issues related to HDMI connection, resolution, and sound.
Troubleshooting network connection problems and DVR recording failures.
Troubleshooting issues with operating the receiver and performing a flash reset.
To Next Page
