ROTEX 600 XTPRO: Service & Maintenance Manual - rev. 1.1
Page 10.2
10.2. ROUTINE MAINTENANCE OPERATIONS
These operations can be carried out by the owner of the machine and do not require any
special skills.
The internal cleaning procedures are simple cleaning operations aimed at keeping the interior of the
machine clean. It is recommended to perform these operations at least once a month.
For internal cleaning of the machine, proceed as follows:
10.2.1. SETTING UP THE OPERATION
1. Turn off the machine by placing the switch in the 0 position (OFF).
2. Unplug the mains lead from the wall outlet.
3. Open the machine guards.
10.2.2. CLEANING OPERATIONS
1. Use a vacuum cleaner to clean the interior, paying particular attention to the alternator and the
electronic circuit boards.
WARNING: when carrying out these operations, be careful not to damage the cables.
2. Clean the pedal wheel guideway using a nylon brush.
3. Move the machine and clean the floor underneath using a vacuum cleaner.
To Next Page
Loading...
