Technogym Rotex 600 XTPRO - Disassembling the Pedals Group

ROTEX 600 XTPRO: Service & Maintenance Manual - rev. 1.1
Page 7.19
7.17. DISASSEMBLING THE PEDALS GROUP
Figure 7.17-1
For each PEDAL:
1. Unscrew the 4 screws a fixing the PEDAL to
the pedal lever using a 5-mm T wrench.
2. Remove the PEDAL.
To reassemble the PEDALS, carry out the above
steps in reverse order.